System Health Checks

Your solar, battery and EV charger are built to last, but like any system they work best when they’re checked. Small faults can quietly cut your savings, and some can become a safety risk. Many homeowners don’t find out their system is underperforming until their power bill goes up. Our accredited installers carry out health checks on systems whether we installed them or not, so it doesn’t matter if your original installer is no longer around.

Solar System Health Checks

On many older solar systems the inverter screen no longer works, and without an app on your phone or computer there’s no way to see how your system is performing. That leaves only your power bill to go by, and a bill isn’t a reliable way to judge the health of your system. Our installer will get up on your roof and test the voltage and performance of each panel, check for dirty or damaged panels, inspect the condition of your cabling and isolators, and make sure your inverter is working as it should.

Batteries Health Checks

A battery that isn’t charging and discharging properly can mean you’re buying power from the grid at night when you shouldn’t need to. We’ll check that your battery is charging from your solar and powering your home as it should, review its settings and monitoring, look for any fault or error codes, and inspect the installation, wiring and ventilation for safety.

EV Chargers Health Checks

Your EV charger needs to be safe and reliable every time you plug in. We’ll test that it’s charging your car properly, check the wiring, circuit protection and connections, inspect the cable and plug for wear or damage, and make sure any solar charging settings are working so you’re making the most of your own power.

We make it simple. We’ll explain clearly what we find and whether anything needs attention, with no pressure and no jargon. If repairs or upgrades are needed, we can often take care of them in the same visit, which saves you from needing a second callout.